Aprimatic Automation Limited
Aprimatic Automation Limited
ZT 42 - ZT 40 - ZT 4
ZT 42 - ZT 40 - ZT 4
Low voltage electromechanical operator for swing gates with leaf width from 1,8m up to 3m max.
Condominium use with max leaf weight up to 800kg.
Motor with intelligent encoder to control the limit switch fitted as an optional on systems without floor stops.
Equipped by a rear articulated joint allows the adjustment of gate anomalies and a front mounting features uniball type,to allows to adjust gate oscillations.
Complies with the current safety standards as regard to obstacle detection and inversion of movement in accordance with EN 12453 and EN 12445.
Twenty 270 (4m & 7m) (replacement for the ZT 40 using existing bracketry)
Forty 270 (4m & 7m) (replacement for the ZT 44 using existing bracketry)
Hydraulic operator for swing gates with leaf up to 2m (4 m max with electric lock), ideal for residential and condominium use.
Equipped with anti-crush system with sensitive by-pass valves calibrated during installation.
This immediately cuts the hydraulic oressure in the event of obstacles to ensure maximum system safety.
The operator have front and rear mountings to enable screw assembly also on wood, PVC and alluminium gates.The articulated fork rear flange ensures flexible and sturdy assembly on the pillar.
Manual key release located on the upper part of the operator in the event of mains power supply failure.
Double valve flow adjustment device for regulating gate opening and closing speed.
Compensates for the unbalanced loads created by wind and out of plumb installation of very light and medium gates.
Model B RF with open and closed position locking for leaf up to 2m (for leaf more width it's necessary the electric lock) and flow adjustment valves.
Underground
Underground
ZT 71 – ZT 72
Compact hydraulic underground operator for swing gates with leaf up to 4m, ideal for residential and condominium use.
The system consists of underground self-supporting boxes (CIA171) aligned with the hinges. The boxes contain the hydraulic jacks (AT175N) which are connected to the hydraulic pump unit using (ZT70) copper couplings.
Equipped with anti-crush system with sensitive by-pass valves calibrated during installation. This immediately cuts the hydraulic pressure in the event of obstacles to ensure maximum system safety.
ZT 70 (AT175) Hydraulic Jack
The automation is located underground and therefore does not affect the look of the gate. Inclusive hydraulic brake to slowdown the gate during opening and closing thus preventing rebound and noisy impact. Hydraulic jack single. To combine necessary to self-supporting box CIA170.
Control unit Hydraulic power unit for swing gates with leaf up to 4m, ideal for residential and condominium use.
Complete with metal box, is equipped with anti-crush system with sensitive by-pass valves calibrated during installation. This immediately cuts the hydraulic pressure in the event of obstacles to ensure maximum system safety.
Very low noise levels thanks to the hydraulic brake to slow down the gate during opening and closing thus preventing rebound and noisy impact.
The hydraulic power unit ZT70 must be combined with an underground operator AT175N (or AT176N) single and a self-supporting box CIA170.
24 Volt Underground
EM73 Low voltage electro-mechanical underground operator for swing gates with leaf up to 1,8m and leaf weight 400kg
or leaf up to 3,5m with electric lock and max leaf weight 200Kg.
Residential condominium use, this automation is located underground and therefore does not affect the look of the gate.
Anti-crush safety ensured by simple adjustment of the T4POWER electronic control unit, and the optional slowdown system (optional) enables rapid leaf movement during the operation and slow approach during opening and closing to prevent rebound and noise.
EM73 can be fitted with a separate lever system to enable opening at 140° or a chain pinion system for opening at 180°.
The manual lock for the SB73 emergency release system is available as an optional. This is a lock with a personalised key to prevent actuation of the leaf emergency release pedal. The lock can be operated from inside and outside the gate. Self-supporting sheet metal container to combine to electro-mechanical underground EM73N.
Equipped of release device, this box allows the underground to work without being sped up from the weight of the leaf, as it comes supported from the structure of the same box. Moreover it allows to an easy maintenance or substitution the operator, as it is not necessary to remove the leaf from own hinge.